6. Compare the printed check pattern with the sample shown below.
❏ All lines are printed:
e
print head nozzles are not clogged. Select No using the
u
or
d
button and press
the OK button.
❏ ere are broken lines or missing segments: e print head nozzles may be clogged. Go to the next step.
Note:
e test pattern may vary by model.
7. Select Ye s using the
d
or
u
button, and then press the OK button.
8.
Follow the on-screen instructions to clean the print head.
9. When cleaning is nished, select Nozzle Check using the
d
or
u
button, and then follow the on-screen
instructions to print the nozzle check pattern again. Repeat cleaning and printing the pattern until all lines are
printed completely.
Related Information
& “Loading Paper in the Rear Paper Feed” on page 21
Checking and Cleaning the Print Head - Windows
1. Load A4-size plain paper in the printer.
2. Access the printer driver window.
3. Click Nozzle Check on the Maintenance tab.
4. Follow the on-screen instructions.
User's Guide
Maintaining the Printer
76
To Next Page
Loading...
