40
To enable peer-to-peer mode, you must select it from the Web Config Utility, under WiFi/Network
Settings > Services > Wi-Fi Direct.
Enabling Wi-Fi Direct Mode
Parent topic: Wi-Fi Networking
Enabling Wi-Fi Direct Mode
You can enable Wi-Fi Direct mode to allow direct communication between your product and computer or
other devices without a wireless router or access point.
1. Press the home button, if necessary.
2. Press the left or right arrow button to select Wi-Fi Setup and press the OK button.
You see this screen:
3. Press the up or down arrow button to select Wi-Fi Direct and press the OK button.
To Next Page
Loading...
