208
5. Lift up the scanner unit, and remove the jammed paper and any torn pieces.
6. Lower the scanner unit and press the power button to turn the product back on.
7. Carefully follow all paper loading instructions when you load new paper.
Parent topic: Solving Paper Problems
Related tasks
Cancelling Printing Using a Product Button
Related topics
Loading Paper
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
To Next Page
Loading...
