3. Select Fax.
4. Enter a phone number or select a number from a speed or group dial list.
5. Select Advanced Options.
6. Select Send Fax Later.
7. Select On, use the number pad to enter your desired time, then select Done.
8. If you need to change any fax settings, scroll down and select your settings.
9. Press the start button. If prompted, select where you placed your document (ADF or scanner
glass).
Note: To cancel faxing, select Cancel.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax at the specified time. You
cannot send additional faxes until the timed fax has been sent.
Note: If the number is busy or there is a communication problem, your product displays a redialing
message and will redial the number in a few minutes.
Parent topic: Sending Faxes from the Product Control Panel
Fax Sending Options
While sending a fax, you can select these options.
186
To Next Page
Loading...
