2. Press the home button, if necessary.
3. Select More Functions.
4. Select Copy/Restore Photos.
5. Select On.
6. Place up to two original photos on the product.
Note: View the LCD screen for instructions on placing your photos on the product.
7. Press the start button.
8. Press + or – to select one or more copies of the photo (up to 99).
9. If you placed two originals on the scanner, press the left or right arrow button to view the second
original, then press + or – to select one or more copies of the photo (up to 99).
10. To adjust your print and copy settings, do one or more of the following:
• To change the print settings, select Settings, and select the necessary settings.
• To adjust the copy image, select Edit > Photo Adjustments, then select your settings.
• To crop or zoom into your photo, select Edit > Crop/Zoom, then press the icons displayed on the
LCD screen to crop your image.
11. When you are ready to print, press the start button.
Note: To cancel printing, select Cancel.
62
To Next Page
Loading...
