C
D
E
F
A
B
Replacing Ink Cartridges
更換墨水匣
Prepare new ink cartridge(s). For best results, gently shake only the new Black
ink cartridge four or ve times and then unpack.
備妥新的墨水匣。在打開包裝袋前，請先搖晃新的黑色墨水匣 4 到 5 次，以
取得最佳的輸出品質。
Open the scanner unit.
打開掃描單元。
Remove the cap from the new cartridge.
取下新墨水匣的護蓋。
Insert the ink cartridge diagonally into the cartridge holder and gently push it
down until it clicks into place.
將墨水匣斜斜地插入墨水匣槽，然後輕輕壓入定位。
Close the scanner unit and follow the on-screen instruction.
闔上掃描單元並依照螢幕上的指示操作。
Clearing the paper jam
清除夾紙
Pull out the rear cover and carefully remove the jammed paper.
拉出後蓋並小心取出夾紙。
Open the rear cover and carefully remove the jammed paper.
打開後蓋並小心取出夾紙。
Reattach the rear cover.
裝回後蓋。
A
B
C
From the rear cover / 從後蓋
A
From inside the printer / 從印表機內部
Open the scanner unit and remove all of the paper inside, including any torn
pieces.
打開掃描單元並移除所有內部紙張，包括任何碎紙。
B
Close the scanner unit.
闔上掃描單元。
Q
You do not need to shake the color ink cartridges and the Photo
Black ink cartridge.
您不需要搖晃彩色墨水匣及相片黑墨水匣。
Q
If the ink cartridge holder does not move to the ink cartridge
replacement position, close the scanner unit and select Setup >
Maintenance > Ink Cartridge(s) Replacement.
若墨水匣槽沒有移至墨水匣更換位置，請關閉掃描單元並選擇
設定 > 維護 > 更換墨水匣。
Push the tab to unlock the ink cartridge holder and then remove the cartridge
diagonally.
按壓凸片以解開墨水匣槽，然後斜斜地取出墨水匣。
!
Never touch the ink cartridges while the print head is moving.
當印字頭移動時，切勿碰觸墨水匣。
D
Press x to start printing.
按下 x 鍵開始列印。
G
Wait until a completion message is displayed.
等待顯示完成訊息。
C
Press Settings or d, and then make the print settings. Scroll down if necessary.
按下設定或 d，並進行列印設定。視需要往下捲動。
To Next Page
Loading...
