284
3. Place the protective material that came with the product on top of the ink cartridge holder as shown
and secure the ink cartridge holder to the case with tape.
Caution: Do not place tape on the white flat cable inside the product; otherwise, you may damage
your product.
4. Lower the scanner unit.
5. Remove all the paper from the product.
6. Remove any memory cards or USB devices inserted in the product.
7. Unplug the power cable.
8. Disconnect any connected cables.
9. Close all parts on the product as shown.
Downloaded from ManualsNet.com search engine
To Next Page
Loading...
