Epson XP-970 User Manual

302
Cannot Scan Over a Network
If you cannot scan over a network, try these solutions:
• Make sure the computer and product are connected to the same network (or network segment/VLAN).
• Move the product and computer or smart device closer to the router or access point.
• If you cannot scan from your product control panel, make sure you restarted your computer after
installing the product software. Make sure the Event Manager program is not being blocked by your
firewall or security software.
• Check the scanning setting assigned in Epson Event Manager.
• If network communication was interrupted while starting Epson Scan 2, exit Epson Scan 2, wait a few
seconds, and restart it. If Epson Scan 2 cannot restart, turn off your product, turn it back on, and try
restarting Epson Scan 2 again.
• If you are scanning a large original at a high resolution, a network communication error may occur. Try
scanning again at a lower resolution.
• Check the network connection setting in the Epson Scan 2 Utility.
• Check the scanner setting and reset the connection if necessary using Epson Scan 2 Utility:
Windows 10: Click and select EPSON > Epson Scan 2 Utility. Make sure your product is
selected. If necessary, select the Other tab and click Reset.
Windows 8.x: Navigate to the Apps screen, select EPSON, and select Epson Scan 2 Utility. Make
sure your product is selected. If necessary, select the Other tab and click Reset.
Windows (other versions): Click or Start > All Programs or Programs > EPSON > Epson
Scan 2 > Epson Scan 2 Utility. Make sure your product is selected. If necessary, select the Other
tab and click Reset.
Mac: Open the Applications folder, click Epson Software, and click Epson Scan 2 Utility. Make
sure your product is selected. If necessary, select the Other tab and click Reset.
• You may need to disable the firewall and any anti-virus software on your wireless router or access
point.
• If you see the message "Network product is not available: currently being used by user", there may be
a communication error between the product and computer. Restart the product.
• If the Firewall function is active, the product may not be discovered by the Epson Scan 2 Utility. Open
the Epson Scan 2 Utility, enter the IP address for your product, and click Add.
Downloaded from ManualsNet.com search engine

Epson XP-970 Specifications

General

Print Technology	Inkjet
Max Print Resolution	5760 x 1440 dpi
Printer Type	All-in-One
Functions	Print, Scan, Copy
Ink Technology	Claria Photo HD Ink
Number of Ink Cartridges	6
Duplex Printing	Yes
Borderless Printing	Yes
Output Paper Capacity	30 sheets
Print Speed (Black)	8.5 ppm
Print Speed (Color)	8 ppm
Connectivity	USB, Ethernet, Wi-Fi
Display	4.3" touchscreen
Paper Formats	A4, A5, A6, B5, Letter, Legal
Mobile Printing	Epson Connect, Apple AirPrint, Google Cloud Print
Input Paper Capacity	100 sheets standard
Dimensions	479‎ x 356 x 148 mm (Width x Depth x Height)
Scanner Type	Flatbed
Weight	8 kg