Equinox Systems XP 80W - Page 5

www.prolight.co.uk Gobo Projector XP 80W User Manual
5
Operating instructions
DMX mode:
Operating in a DMX control mode environment gives the user the greatest exibility when it comes
to customising or creating a show. In this mode you will be able to control each individual trait of the
xture and each xture independently.
To access the DMX address mode, press the “MENU” button on the rear of the unit to show A001
on the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to set the
required DMX address. Press the “ENTER” button to conrm the setting.
To exit out of any of the above options, press the “MENU” button.
Sound active mode:
To access the sound active mode, press the “MENU” button on the rear of the unit to show SU.00 on
the LED display. Now press the “ENTER” button and use the “UP” and “DOWN” buttons to select the
strobe speed between SU 0 ~ SU99.
To exit out of any of the above options, press the “MENU” button.
Master/slave mode:
To set the master unit, press the “MENU” button on the rear of the master unit to select your
desired program (sound active or manual).
To set the other units in slave mode, press the “MENU” button on the rear of the unit to show SLaU
on the LED display and press the “ENTER” button to conrm the setting. The units will now run in
sequence with the master unit.
To exit out of any of the above options, press the “MENU” button.
Manual mode:
To access the manual mode, press the “MENU”
button on the rear of the unit to show F-.00 on
the LED display. Now press the “ENTER” button
and use the “UP” and “DOWN” buttons to select
the strobe speed between F- 0 ~ F-99.
Press the “ENTER” button to conrm the setting.
Now press the “MENU” button and d-.00 will
be displayed. Now press the “ENTER” button and
use the “UP” and “DOWN” buttons to select the
dimming between d- 0 ~ d-99. Repeat for
rG. 0 ~ rG.99 (Rotation direction/speed).
To exit out of any of the above options, press the
“MENU” button.
3 channel mode:
Channel Value Function
CH1 000-255 Master dimmer (0-100%)
CH2
000-007 No function
008-247 Strobe (slow-fast)
248-255 Sound active strobe
CH3
000-009 Rotation stop
010-120 Anti-clockwise rotation (fast-slow)
121-134 Rotation stop
135-245 Clockwise rotation (slow-fast)
246-255 Rotation stop