Equity 30902 User Manual

DIGITAL ALARM CLOCK 12v DC
OPERATING INSTRUCTIONS
Model: 30902
Display / PM Indicator / Alarm On Indicator
When the clock is plugged in, the display 12:00 is being displayed. The clock will automatically indicate AM/PM, but you must be sure to
correctly set the indicator for the time and alarm. When the PM indictor is on, it is "PM"; when the PM indicator is off, it indicates "AM", When
the Alarm Indicator is on, the alarm will sound at the time set. Once the snooze feature is activated, the alarm indicator will blink.
Set Time
To set the time, press the TIME SET (6) button and the HOUR SET (3) button until the correct hour is displayed (and the AM/PM is correct). then
release the HOUR SET (3) button and press the MINUTE SET (4) button until the correct time is displayed.
Set Alarm
To
set the alarm time, press and hold the ALARM SET (5) button and the HOUR SET (3) or MINUTE SET (4) button, as above. Be sure to set the
AM/PM properly too.
Snooze
Touch the SNOOZE bar (1) and get an extra 9 minutes to sleep. This may be repeated up to six times within one hour.
To Operate Alarm
Slide the ON/OFF switch (2) on the left of the clock to the ON position. The alarm will sound at the time set.
High /Low alarm sound
Slide the HI/ LO switch (7) on the right of the clock to the Hl or LOW position. The alarm will sound will be higher or lower
accordingly.
Battery Backup (Battery not included)
Install one 9V alkaline battery in the battery compartment using the battery connecter. Note this battery can be installed without disconnectìng
the clock power. If the power fails, the battery backup will automatically continue the time and alarm operation but the display will disappear.
During a power outage, the alarm will sound al the set time. When the power is restored the display digits will reappear with the correct time.
Please
help in preservation of the environment and return used batteries to an authorized depot.
Remove the battery from the clock if you do not intend to use for an extended period of time.

Equity 30902 Specifications

General

Brand	Equity
Model	30902
Category	Alarm Clock
Language	English

Summary

Operating Instructions

Display / PM Indicator / Alarm On Indicator

Explains the clock display, PM indicator status, and how the alarm indicator functions.

Set Time

Step-by-step guide to setting the correct hour and minute, including AM/PM.

Set Alarm

Instructions for setting the alarm time, emphasizing correct AM/PM setting.

Snooze Function

Details on activating the snooze feature for an additional 9 minutes of sleep.

Alarm Operation

How to turn the alarm ON and ensure it sounds at the set time.

High/Low Alarm Sound

Adjusting the alarm volume between high and low settings.

Battery Backup

Guidance on installing a 9V battery for backup power and its function during outages.

Warranty Information

Two Year Limited Warranty

Details the terms and conditions of the 2-year warranty for material and workmanship defects.

Product Support and Returns

Information on how to send a product for repair or replacement under warranty.