EasyManua.ls Logo

Equity nightvision 21103 - User Manual

Equity nightvision 21103
2 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NightVision ALARM CLOCK
MODEL 21103
OPERATING INSTRUCTIONS
Alarm ON/OFF switch
3. Blue superbright backlight.
TO ACTIVATE THE CLOCK
Open the battery cover (at the bottom of the clock) and insert 3
XAA batteries
observing the indicated polarity symbols. Replace the cover.
TO SET THE TIME
Turn the 'Time setting knob' in the direction of the arrow to set the hour and
minute hands to the correct time.
TO SET THE ALARM TIME
Turn the 'Alarm setting knob' in the direction of the arrow to the desired wake
up time.
TO ACTIVATE/DEACTIVATE THE ALARM
Slide the 'Alarm ON/OFF switch' to AL.ON position to activate the alarm.
To deactivate the alarm, slide the 'Alarm ON/OFF switch' to the AL.OFF position.
TO USE THE SNOOZE
When the alarm sounds, press the 'Snooze/Light button' to stop the alarm.
The alarm will sound again after 5 minutes. The snooze feature can be
repeated until the 'Alarm ON/OFF switch' is turned OFF.
1. Crescendo alarm.
2. Repeating snooze alarm.
Please read these instructions carefully and keep in a safe place for future
reference.
NightVision Sensor ON/OFF Switch
Snooze/Light button
Alarm setting knob
Time setting knob
www.equitybylacrosse.com/support
Question and Answer IconNeed help?

Do you have a question about the Equity nightvision 21103 and is the answer not in the manual?

Summary

Operating the NightVision Alarm Clock

Activate the Clock

Insert 3xAA batteries into the clock, observing polarity symbols, and replace the cover.

Set the Time

Turn the 'Time setting knob' to set the hour and minute hands to the correct time.

Set the Alarm Time

Turn the 'Alarm setting knob' to set your desired wake-up time.

Activate;Deactivate Alarm

Slide the 'Alarm ON/OFF switch' to AL.ON to activate or AL.OFF to deactivate.

Use the Snooze Feature

Press the 'Snooze/Light button' to stop the alarm temporarily; it will sound again in 5 minutes.

NightVision Technology

Sensor illuminates the dial in low light; slide switch to 'Sensor' or 'ALWAYS ON' for backlight.

Changing Batteries

Replace batteries annually, do not mix types, and use only AA (1.5V) Alkaline batteries.

Maintenance and Cleaning

Clean with a soft cloth; avoid corrosive cleaners or chemical solutions.

Product Warranty

Two-year warranty against defects; excludes damage from misuse or negligence.

Equity nightvision 21103 Specifications

General IconGeneral
BrandEquity
Modelnightvision 21103
CategoryAlarm Clock
LanguageEnglish

Related product manuals