-19-
Note: The alarm will sound for up to 5 minutes.
Tamper Alarm
When the outdoor camera is moved away from its bracket, both the outdoor camera
and video handset will sound an alarm tone. The outdoor camera call button will be
Inoperable, press or to stop the alarm tones.
Backlight
1. When the outdoor camera power is supplied by DC 12V, the call button backlight
will be illuminated. During registration, calling, alarm, monitoring and intercom
status, the backlight will flash.
2. When the outdoor camera power is supplied by batteries and is in 'Power
Consumption Mode' , the call button will flash during activation (registration,
calling, alarm, monitoring and intercom status). The call button will not be
backlight.
3. When the outdoor camera is powered by batteries and in 'Power Save Mode' , the
call button will flash only during activation (when the call button is pushed) and
then will stop.
To Next Page
Loading...