9
02
Unpacking
1. Unpack all parts and lay them on a at, stable surface.
2. Remove all packing materials and shipping devices, if applicable.
3. Make sure the delivery contents are complete and free of any damage. If you nd
that parts are missing or show damage, do not use the product but contact your
dealer. Using an incomplete or damaged product represents a hazard to people
and property.
4. Ensure all the accessories and tools needed for assembly and operation are at
your disposal, including suitable personal protective equipment.
WARNING! The product and the packaging are not children’s toys! Keep
plastics bags, sheets and small parts away from children. There is a
danger of choking and suffocation!
03
Setup
WALL-MOUNT HOLES
The charger has hanging holes for convenient storage.
Install screws in the wall 4.5 inches (114.3 mm) apart (Fig. A). Use screws sufciently
strong to hold the combined weight of the charger and battery pack.
Connection to power supply
1. Connect the power cord plug (2) with a suitable socket.
WARNING! Check the voltage! The voltage must comply with the
information on the rating label!
2. Your product is now ready to be used.
MNL_Erbauer_GB_12V Charger_EBC12-Li_V8_210422.indd 9 4/22/21 6:22 PM
To Next Page
Loading...
