Erbauer EHTP22 - Maintenance Table

32
EHTP22
In more detail . . .
Maintenance table
Inspect and maintain this equipment regularly based on below maintenance table. Keep
the equipment in good working condition during maintenance.
Part Task Before/after
each use
Every 15 hours 15 hours of
operation
Every 25 hours
of operation
Spark plug
check X
clean X
replace whenever necessary
Air lter
check X
clean X
replace whenever necessary
Fuel lter
and fuel
lines
clean whenever necessary
replace whenever necessary
Gear box lubricate X
Cutting
device
check X
lubricate X
clean X
replace/
sharpen
whenever necessary
Care and maintenance