Erbauer EWC1500 - Attaching Auxiliary Handle; Operation and Use; Intended Use and Controls

26
04
Auxiliary handle (Fig. J)
Always use the auxiliary handle to safely hold and guide the power tool.
1. Align the auxiliary handle (16) with the mounting thread for auxiliary handle (8).
2. Rotate the handle clockwise until it is secured fully.
Use
Intended use
This product is intended for dry cutting of channels in materials such as concrete,
masonry and paving, without using water, with a guide wheel.
Before you start
01
Protection
Controls
WARNING! Always switch the product off and disconnect it from power
supply before making any adjustments!
1500 W Wall chaser_MNL_EWC1500_DFT_Erbauer_GB_V20518_20180706.indd 26 7/6/18 4:05 PM