Ercolina Super Bender 060 - 060 Super Bender Features

-6-
060
®
Super Bender
®
Features
● Bends material to ¼″ to 2½″ diameters
● Heavy-duty gear case with maximum 8⅞″ CLR
● Patented tooling system achieves CLR two times diameter without mandrel
● Low voltage 24V controls
● Programmable springback settings ensure bend accuracy for a wide variety of material
● Programmable bend angles 0 to 180°
● Remote foot pedal for hands free operation
● Patented swing away vise system and hex mounted tooling increase productivity
● Overload protection controls
● Standard multiple language capability
● Transportation wheels and lift handle built into base cabinet
● Tool free tooling changes with multiple CLR available for each diameter
● Accepts Ercolina
®
two axis A40/P positioner table
● No hydraulics
● Comprehensive (1) one-year warranty
Machine Capacities
Material Maximum Maximum
Diameter Thickness
Pipe 1.5″ ID Schedule 40
Mild steel tube 2″ .140
Soft brass 1⅞″ .125
Stainless steel 1⅞″ .109
Welded furniture tube 2⅛″ .125
ST 35 hydraulic steel 2″ .156
304L hydraulic stainless 2″ .125
Hard copper and aluminum 2½″ .156
Round solids 1¼″ –
Rectangular solids ⁵⁄₁₆″ x 1⅞″ –
Rectangular tube ¹³⁄₁₆″ x ⁹⁄₁₆″ .125
Square tube 1⁹⁄₁₆″ x 1⁹⁄₁₆″ .125
Square solids 1³⁄₁₆″ x 1³⁄₁₆″ –
Mild steel T 1⁹⁄₁₆″ x 1⁹⁄₁₆″ .187
Mild steel C channel 1¼″ x ⅝″ .187
All capacities based on mild grade material using machine at low bending speed;
Heavy wall and high tensile materials reduce machine capacity.
Dimensions and Specications
Height x Length x Width 36″ x 24″ x 10″
Bending speed Two speed 1.7
Motor 120 volt single phase 50/60 cycle
Minimum and Maximum CLR ⅜″ - 8⅞″
Bending angle range 0 to 180
◦
Weight 189 lbs.