Ercolina Top Bender 050 User Manual

1
CML International S.p.A.
Electric Metal Bending Machine
ERCOLINA® by CML International S.p.A. ITALY
Tel. +39 0776 40281
Fax +39 0776 404801
www.ercolina.it - www.ercolina.com
e-mail: info@ercolina.it
USE AND MAINTENANCE
INSTRUCTION MANUAL
This manual was written according to
prescriptions of attachment I-1.7.4.
of :
EEC DIRECTIVE 89/392 →
98/37/CEE
«MACHINERY DIRECTIVE»
MODIFIED BY DIRECTIVE 91/368
RECEIVED BY PRESIDENTIAL
DECREE NR. 459/1996
EEC Directive 89/392 → 98/37/CEE –
published on the European Community
Official Journal
nr. L183 dated June 29, 1989
EEC Directive 91/368 – published on
the European Community Official
Journal
nr. L198 dated July 22, 1991

Ercolina Top Bender 050 Specifications

General

Model	Top Bender 050
Manufacturer	Ercolina
Type	Power Tool
Maximum Bending Angle	180 degrees
Voltage	220V
Bending Capacity	2-1/2" Sch. 40 Pipe
Weight	220 lbs (100 kg)
Dimensions	36" x 24" x 24" (91 cm x 61 cm x 61 cm)

Summary

Warranty

Warranty Conditions and Restrictions

Details on the warranty period, coverage, and limitations for the machine.

General Safety Norms

Forbidden Actions

List of actions prohibited during machine operation and maintenance.

Mandatory Actions

List of required safety procedures and precautions for machine operation.

Program Procedures

Activate Data Entry Mode

Steps to switch on the machine and enter data input mode.

Inputting Bend Angle Values

Procedures for Bend Making

Machine Standby and Tooling Setup

Spring Back Angle Measurement

How to Correct the Spring-Back Angle

Adjusting Spring-Back Angle

Editing the Actual Bend Angle

Practical Use of the Machine