Ercolina Top Bender 050 - General Safety Norms; Forbidden Actions

6
CML International S.p.A.
GENERAL SAFETY NORMS
The Ercolina® Top Bender has been manufactured according to state-of-the-art
technology and in compliance with safety regulations officially accepted.
Nevertheless the machine can be dangerous for the operator or a third person if used
in a improper manner. It is important therefore to read the following safety norms.
Use the machine only and specifically for the use which it has been
manufactured for and with full respect of the general safety norms. The
Manufacturer will not be liable for any injury or damage to objects due to an
incorrect use of the machine;
Do not switch on power supply and use the machine without
reading carefully the instruction manual;
Do not install and use the machine in environments containing:
 flammable gases or liquids;
 explosive materials;
Do not install and use the machine in humid or wet environments;
Do not expose the machine to the rain;
Do not touch parts in motion;
Do not put hands on the tube during bending;
Have not more than one person working on the same machine;
Working area should not be restricted to a too limited space in proportion
to the tube lengths to be bent;
FORBIDDEN