21
7.0 ELECTRICAL DEVISE AND CIRCUIT
1. single phase alternating current
Synchronous motor by capacity starting 250 W, 220 V, 50 Hz, 2800 r.p.m.
2. on/off knob
3. right/reverse turn knob
4. terminal block
5. three phase plug
8.0 ACCESSORIES
1. Standard accessories
Dead center Morse 1 1 piece
Dead center Morse 2 1 piece
Gear change 1 set
Gear change shaft sleeve 1 piece
Triangular chuck key 1 piece
Exterior jaw for triple jaw chuck 3 pieces
Inner hexagonal wrench A-4 1 piece
Inner hexagonal wrench A-6 1 piece
Wrench S-14 1 piece
2. Special accessories
Clamping sleeve accessories (3-12 mm) 1 set
Dial accessories 1 set
Faceplate 1 piece
Straight tool carriage 1 piece
Flat-nose pliers 1 piece
To Next Page
Loading...