EasyManua.ls Logo

ergoline AFFINITY 880-S DYNAMIC POWER - Cleaning the Filter in the Base

ergoline AFFINITY 880-S DYNAMIC POWER
176 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning and maintenance
54
5.17 Cleaning the filter in the base
Opening the bed base: see page 43.
Remove the filter.
Cleaning the filter when moist or dry.
Dry cleaning: Vacuum cleaner (depending on the degree of soiling)
Moist cleaning: Use water and detergent or put in a dish-washer
WARNING!
The device may be damaged by moisture!
The cleaned filters must be dry before they are replaced.
Refit the cleaned and dried filters.
Close the bed base. You should hear the bed base click into place.

Table of Contents

Related product manuals