Ergoline Vertical
User manual
Seite 10 von 29
CABIN
The aeration of the room (room/cubicle) must be adequate. The room will have a possible duct for the
suction and extraction of the hot air produced by the tanning equipment. In any case, see the
maximum working temperatures given on the dataplate of the appliance.
For optimum functioning of the appliance it is advisable to comply with the measurements (distances)
given below:
ELECTRICAL CONNECTION
The electrical system of the room must comply with current regulations (CEI 64-8/7;V2).
The equipment will be delivered with a power supply cable (4 mt) without plug.
It is the buyer’s responsibility to arrange the power outlet complete with plug.
The grid connection device must have a contact opening of at least 3 mm.
HOW TO INSTALL THE UNIT
Take out from the package the metal brackets.
The brackets are numbered too as shown on the
right.
C
D
E
To Next Page
Loading...
