Ergoline Vertical
User manual
Seite 23 von 29
REMOTE CONTROL CONNECTION
On the external side you have a 6-wire cable, that’s outcoming from the back bottom of the unit, to
allow the interfacing to the external control.
In the drawing below you can see how to connect the unit to a generic external control.
Qmed 48-180
ROUTINE AND EXTRAORDINARY MAINTENANCE
To keep the solarium efficient, carry out the following simple operations:
Clean the lamps with a mixture of water and alcohol (50%+50%) or with specific products for cleaning
glass surfaces.
Clean the acrylic without using detergent products based on alcohol (the surface could become dull
and therefore stop a part of the UV).
Various suitable products are readily available on the market for this purpose.
Clean the equipment (especially the parts in contact) with non-aggressive disinfectant products.
Various suitable products are readily available on the market for this purpose.
Periodically make sure that the air intakes are not blocked with dust or other materials (tissues, etc.).
Periodically replace the lamps and the starters (normally between 400 and 600 hours of work).
Brown
White
Pink
Gray
Yellow
Green
230V ac L
N
Input 230Vac L1
For start from N1
external control
Internal start
(Start button)
External start
To Next Page
Loading...
Need help?
General
