21Dialog 3210, 3211 and 3212
When You Receive a Busy Tone
When You Receive a Busy Tone
Busy extension or external line
If you call an extension and receive a busy tone or get no answer or
all external lines are busy you can use these methods:
Automatic callback
If a called extension is busy or there is no answer:
6 Press
Notes:
You can also press: Callback (function key pre-
programmed by you).
France, Finland and Sweden press
5
d Replace the handset to finish procedure
You are called back (recall ringing signal) when the ongoing call is
finished or the next time a new call is finished. You have to answer
within eight seconds, otherwise the Callback service is cancelled.
u Lift the handset when you are called back
The system calls the extension.
Note: Callbacks can be activated on several extensions at
the same time. Callbacks from additional lines will recall on
the Access 1 line.
To Next Page
Loading...
