Programming and Adjustments
Dialog 3210, 3211 and 321276
Programming of ringing signals
Program on Dialog 3210
You have 6 programmable ringing signals on your telephone. The
different signals can be programmed on access lines, additional
lines and multiple represented lines.
H Keep pressed while programming
g Press the corresponding line key
( 0 — 6 ) Select the ringing signal you want to use according to the list
below
0 = Silent.
1 = Periodic ringing signal.
2 = Delayed periodic ringing signal.
3 = One muted ringing signal.
4 = One muted delayed ringing signal.
5 = Immediate one way speech connection with single tone
burst controlled by function key.
6 = Immediate one way speech connection with single tone
burst.
Note: Options 5 and 6 are not available for multiple
represented lines.
(g Press
H Release
To Next Page
Loading...
