Settings
BusinessPhone – Dialog 4224 Operator / Dialog 3214100
Ringing signal
By programming, you can adjust ringing type (2 types), ringing
volume (10 steps) and ringing character (10 characters).
prog Press (see display).
ringing Press (see display).
You can now select ringing type, volume or character.
Ringing type
Select type 1 if you want to set the ringing volume at a constant
level, select type 2 if you want gradually increasing volume when
the phone rings.
type Press (see display).
You will hear the selected type.
next Press to change (see display).
Clear
è Press to finish the procedure.
Note: When type 2 is selected, the programming of the
ringing volume is not applicable.
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
RINGING - CHANGE
type volume character return
Dialog4224En.book Page 100 Tuesday, August 24, 2004 5:40 PM
To Next Page
Loading...
