Ericsson Dialog 4224 Operator - Page 96

Settings
BusinessPhone – Dialog 4224 Operator / Dialog 321496
forward Select Function code (see display).
See section “Function codes and required data” on page 98.
enter Press (see display).
z Enter associated number.
See section “Function codes and required data” on page 98.
store Press (see display).
Continue with section Select ringing character.
Or:
Clear
è Press to finish programming.
After approximately 10 seconds, the Function key is active.
Select ringing character
z Select ringing character (0-4).
See section “Function codes and required data” on page 98.
enter Press (see display).
Clear
è Press to finish programming.
After approximately 10 seconds, the Function key is active.
Example:
You want to supervise extension 234 on a programmable key with
one delayed ringing signal. For available Function codes, see
section “Function codes and required data” on page 98.
prog Press (see display).
key Press (see display).
Ô Press the desired programmable key.
12 May 10:35 +15°^|| OPERATOR 200
C= 0 I= 0 ||
||
PHONE PROGRAMMING
key short-no. settings ringing
Dialog4224En.book Page 96 Tuesday, August 24, 2004 5:40 PM