30
4. Tap the Yes button if you've installed the device in a
light or medium-duty vehicle not equipped with a standard,
round 9-pin or 6-pin diagnostic connector, and you are using
this adapter.
5. Insert the OBD-II adapter into the OBD-II port.
6. Press the Pairing button on the adapter.
7. Wait for the blue light to start rapidly flashing.
8. Tap the Next button on the screen.
The device begins searching for the OBD-II adapter, so please
wait until this step is completed.
The Success screen appears when the EROAD OBD-II adapter
pairing is completed.
9. Tap the Continue button.
To Next Page
Loading...
