ESAB 653 cvcc User Manual

17
ESAB 653cvcc
Multi-process, three phase power sources de-
signed for heavy duty industrial DC welding ap-
plications
Use for Mig, flux cored wire, submerged arc and
stick electrode welding or air carbon arc gouging
Compatible with 42v wire feeders: MobileMaster IV,
2E, 4HD, 4HD Dual and with 115v wire feeders/
controls: Mig 35, Digimig, Digimig Dual, Digimatic
II,
UEC-8, DuraDrive 4-30 and DuraDrive 4-48
115 vac outlet for water circulator or tools
Control electronics are protected from dirt and dust
in an easy-access compartment
Optional wire feed adaptor kits for Miller and Lin-
coln wire feeders
Ordering Information
ESAB Power Sources
653cvcc, 230/460/575 vac, 3 ph, 60 Hz .................................................... 37830
653cvcc, 220/400 (380-415) vac, 3 ph, 50 Hz CE ...................................37832
ESAB 653cvcc Migmaster Packages
The following package includes an ESAB DC power source, wire
feeder, 8 ft. (2.4m) control cable, 8 ft. (2.4m) gas hose, .035/.045
in. (.9/1.2mm) feed roll, - 15 ft. (4.5m) GunMaster gas-cooled gun,
15ft. work cable with clamp, 15 ft. wire feeder weld cable and
R-33-FM-580 regulator with adjustable flowmeter.
Migmaster 653cvcc, Mig 4HD, GM-400cc,
230/460/575 vac ......................................................................................... 36234
•
•
•
•
•
•
Options & Accessories
HC-3B Hand Control, 30 ft. (9.1m) cable
(requires 0558001436) ..........................................................................33838
Mini Boom for Mig 4HD (requires Swivel Post) ..................................34322
Swivel Post, use with Mig 4HD or Mig 2E wire feeders ..................... 36172
Auto Fan™ Kit ....................................................................................................36707
TR-29 Truck Kit .................................................................................................. 37924
Remote Control Kit ............................................................................0558001436
Miller Wire Feeder Adaptor Kit (24 vac only) .........................0558001415
Lincoln Wire Feeder Adaptor Kit ................................................0558001416
Work Cable with Clamp (15 ft.) ..................................................... 0558001440
Feeder Cable with Lug (15 ft.) ........................................................0558001441
Specifications
Rated DC Output* @ 100% duty cycle,
50/60 Hz, cv or cc 653cvcc .........................................650 amps @ 44 vdc
Rated DC Output* @ 60% duty cycle,
50/60 Hz, cv or cc 653cvcc .........................................750 amps @ 44 vdc
Open Circuit Voltage, 50/60 Hz 653cvcc ...................54 vdc (cv)/59 vdc (cc)
Primary Input Voltage & Current @ rated 100% duty cycle load
653cvcc, 230/460 vac, 60 Hz, 3 ph ......................................108/54 amps
653cvcc, 230/460/575 vac, 60 Hz, 3 ph .......................108/54/43 amps
653cvcc, 220/400 (380-415) vac, 50 Hz, 3 ph ...........................................
...........................................................................................102/56 (59-54) amps
Power Factor @ rated load .................................................................................83%
Auxiliary Output Power (receptacle) ....................115 vac, 50/60 Hz, 10 amps
W x L x H ..........................18.75 in. (46 cm) x 32.5 in. (83 cm) x 25 in. (64 cm)
Net Weight,** 60 Hz 653cvcc ......................................................493 lb. (224 kg)
Shipping Weight** (approximate), 60 Hz 653cvcc .................503 lb. (229 kg)
* For 208 vac, 60 Hz and 380 vac, 50 Hz service, derate output current
rating 10%.
** For 50 Hz models, add 40 lb. (18kg)
Shown with optional DuraDrive 4
®
-48 wire feeder,
GM-400 Mig welding torch, TR-29 Truck kit,
15 ft. work cable and welding wire
SECTION 2 DESCRIPTION

ESAB 653 cvcc Specifications

General

Brand	ESAB
Model	653 cvcc
Category	Welding System
Language	English