Need help?Do you have a question about the ESAB AristoFeed 48- 4 and is the answer not in the manual?
General| Input Frequency | 50/60 Hz |
|---|---|
| Max. Spool Diameter | 300 mm |
| Protection Class | IP23 |
| Wire Diameter Range | 1.6 mm |
| Supply Voltage | 42 V |
| Duty Cycle | Unknown |
Details the items included with AristoFeed 30 and AristoFeed 48 units.
Describes the various control panels available for the AristoFeed units.
Provides instructions and warnings for lifting the wire feed unit.
Explains the need and placement of terminating resistors for CAN bus.
Details how to connect multiple wire feed units, up to a maximum of four.
Details the various connections and controls on the wire feed unit.
Explains the water connection system and operation for water-cooled guns.
Describes the requirements and operation of the remote control unit.
Details how to adjust and check the wire feed pressure for smooth operation.
Step-by-step guide for changing or loading wire on the AristoFeed 30.
Step-by-step guide for changing or loading wire on the AristoFeed 48.
Instructions for replacing the feed rollers on the AristoFeed 30 unit.
Instructions for replacing the feed rollers on the AristoFeed 48 unit.
Guidance on inspecting and cleaning the wire feed unit and welding gun.
To Next Page