7 ORDERING SPARE PARTS
0444 408 331
- 20 -
© ESAB AB 2020
7 ORDERING SPARE PARTS
CAUTION!
Do not make any repairs to the equipment unless you are fully qualified, as
described in the maintenance section.
Feed 3004 is designed and tested in accordance with the international and European
standards IEC/EN 60974-5 and IEC/EN 60974-10. It is the obligation of the service unit
that carried out the service or repair work to make sure that the product still
conforms to said standard.
Spare parts and wear parts can be ordered through your nearest ESAB dealer, see the back
cover of this document. When ordering, please state product type, serial number, designation
and spare part number in accordance with the spare parts list. This facilitates dispatch and
ensures correct delivery.
To Next Page
Loading...
