ESAB migmaster 215 pro - 3 Introduction; Equipment; 4 Technical Data

-- 6 --
MM215Pe
3 INTRODUCTION
Migmaster 215 Pro is step controlled power source in a compact design, intended
for welding with solid steel, stainless steel or aluminium wire as well as tubular wire
with or without shielding gas.
The possibility of welding with homogeneous wire/shielding gas and welding with
gasless tubular wire is obtained by switching the + and -- connections on the
machine front.
ESAB’s accessories for the product can be found on page 40.
3.1 Equipment
The power source is supplied with:
S Return cable 3m with return clamp
S Shelf for gas cylinder
S Instruction manual
4 TECHNICAL DATA
Migmaster 215 Pro Migmaster 215 Pro
Voltage 208/230V, 1∼ 50/60Hz 208/230/460/575V, 1∼ 50/60Hz
Permissible load at
100% duty cycle 110A 110A
60 % duty cycle 160A 160A
20 % duty cycle 250A 250A
Setting range (DC) 40A/16.0V--250A/26.5V 40A/16.0V--250A/26.5V
Open circuit voltage 19.5--42V 19.5--52V
Open circuit power 200W 320W
Power factor at max load 0.92 0.92
Control voltage 42V, 50/60Hz 42V, 50/60Hz
Wire feed speed 55--748ipm (1.4--19m/min) 55--748ipm (1.4--19m/min)
Burnback time 0--0.5s 0--0.5s
Spot welding 0.4--3.5s 0.4--3.5s
Welding gun connection EURO EURO
Wire dimension range
Fe
Al
FCW
.023--.045” (0.6--1.1mm)
.035--3/64” (0.9--1.2mm)
.030--.045” (0.8--1.1mm)
.023--.045” (0.6--1.1mm)
.035--3/64” (0.9--1.2mm)
.035--.045” (0.9--1.1mm)
Max diameter/weight
of wire bobin
12” (300mm)/33lb (15kg) 12” (300mm)/33lb (15kg)
Dimensions lxwxh 33,8x16,5x28,7”
(860x420x730mm)
33x17x32,7”
(840x430x830mm)
Weight 220lb (100kg) 304lb (138kg)
Operating temperature 14÷104F (--10 ÷ +40
o
C) 14÷104F (--10 ÷ +40
o
C)
GB