ESAB MIGMATIC 250 - MM 250 WIREFEEDER UNIT; RATING; CONNECTION; PREPARATION FOR USE

MM 250 WIREFEEDER UNIT
RATING
Parameter
Value
Applicable wire diameter
0.8 mm to 1.2 mm
Wire feed motor
18V, D.C. Max
Applicable wire spool
Shaft Dia
50 mm
Outer Dia
280 mm or less
Width
105 mm or less
Length of cable and hose
5 Mts
Weight (Without Inter-Connection)
6 Kgs
ACCESSORIES SUPPLIED ALONG WITH THE WIREFEEDER
Gas hose Assembly (2 Mts.)
1
Roller V groove 0.8/1.2 mm H/W
1
Hose Clip
1
Allen Key
1
CONNECTION
Connect power cable, control cable and gas hose firmly to the respective place
of welding power source.
Welding cable
:
Output terminal-Wirefeeder (+) of power source
Control cable
:
Plug socket for wire feed control of the welding
power source
Gas hose
:
Gas outlet fitting of the welding power source.
PREPARATION FOR USE
Feed roller fixing:
Select the feed roller as per the wire diameter & confirm the size of the
groove before fixing.
13