ESAB PLASMAWELD 202 - Plasmaweld 202 Technical Data

4
Plasmaweld 202
Technical Data
TDE202.doc * = option
Mains voltage (V) 3-phase 230 400 *460 500
M Permanent power (kVA) 9,7 9,7 9,7
A
Permanent current (A) 24,4 14,0 12,2 11,2
I Max. current (A) 31,4 18,0 15,8 14,5
Power factor cos phi 0,85 0,84 0.85 0,85
N
Efficiency 0,80
S Frequency (Hz) 50/60
Fuses, slow blow (A) 35 20 16 16
______________________________________________________________________
W Current range DC 5 - 220 A
E Duty cycle Plasma, 60% at 220 A
(10 min cycle) TIG 100% at 170 A
L MMA
D
I
Open circuit voltage DC 98V DC
N
G
______________________________________________________________________
C
O Dimensions (mm) L/W/H 1040/570/940
N
S Weight (kg) 150
T
R Protection class IP 23 M
U Cooling F
C Insulation class F
T Standards EN 60974-1
I VDE 0544-1
O EN 50199
N S-Mark Yes
CE-mark Yes