Removing the Fascia
The EF5000 Stainless Steel fascia is attached to the fire by four
'hooks' on the corners of the fascia. If you need to remove the fascia,
first give the fascia a brief lift upwards as shown.
Now pull the fascia towards you, and rest the Fascia on the brackets
half way down the firebox, or on the ground while you unplug the cord
connecting the fascia to the fire.
Reverse these steps to re-fit the Fascia, ensuring the cord is correctly
plugged in by testing the fire.
Brackets to rest the
top fascia hooks on
while disconnecting
the control cords.
To Next Page
Loading...
