Escort MAX 3 - Narrow Band and Special Detection; Advanced Features and Marking; Shifter Mode Operations; Marker Enables and Location Marking

11 | Page
K Band
On* / Off
Covers frequency range: 24.050 – 24.250 GHz
NOTE: When K Band is off, K Narrow bands are
available selections
K Narrow 1
On* / Off
Covers frequency range: 24.050 – 24.110 GHz
K Narrow 2
On* / Off
Covers frequency range: 24.110 – 24.175 GHz
K Narrow 3
On* / Off
Covers frequency range: 24.175 – 24.250 GHz
K Narrow 4
On* / Off
Covers frequency range: 23.950 – 24.050 GHz
MultaRadar CD
On / Off*
MultaRadar CD detection
MultaRadar CT
On / Off*
MultaRadar CT detection
Ka Band
On / Off*
Covers frequency range: 33.400 – 36.000 GHz
NOTE: When Ka Band is off, Ka Narrow bands are
available selections
Ka Narrow 1
On / Off*
Covers frequency range: 33.600 – 33.700 GHz
Ka Narrow 2
On* / Off
Covers frequency range: 33.700 – 33.900 GHz
Ka Narrow 3
On / Off*
Covers frequency range: 33.900 – 34.200 GHz
Ka Narrow 4
On / Off*
Covers frequency range: 34.200 – 34.600 GHz
Ka Narrow 5
On* / Off
Covers frequency range: 34.600 – 34.800 GHz
Ka Narrow 6
On / Off*
Covers frequency range: 34.800 – 35.160 GHz
Ka Narrow 7
On / Off*
Covers frequency range: 35.160 – 35.400 GHz
Ka Narrow 8
On* / Off
Covers frequency range: 35.400 – 35.600 GHz
Ka Narrow 9
On / Off*
Covers frequency range: 35.600 – 36.000 GHz
Ka-POP
On / Off*
Ka-POP detection
Laser
On* / Off
Laser detection
TSR
On* / Off
Traffic Sensor Rejection (TSR) filtering
RDR
On / Off*
Radar Detector Rejection filtering
K Notch
On / Off*
Reduces sensitivity of K band frequency range:
24.190 – 24.210 GHz
NOTE: K Notch is effective at reducing alerts to
certain vehicle collision avoidance systems
Shifters
Receive / Shift* / Shift4
/ Shift6 / Shift8 /
Shift10 / Off
Shifter mode. Receive = receive-only
Shift4/6/8/10 puts shifters in receive-only mode
after 4/6/8/10 seconds from receiving an alert
NOTE: only available when optional ZR5 or ZW5
shifters are connected
Marker Enable
Default*
Default Marker Enables
Modified
Marker Enables have been modified from their
default settings
Repeatedly press SEN to cycle through
Marker Enables
Press + or – to change the selected Marker
Enable on or off
Other
On* / Off
Other location
Redlight
On* / Off
Redlight camera
Red & Speed
On* / Off
Redlight and speed camera
Speed Camera
On* / Off
Speed camera
Speed Trap
On* / Off
Speed trap