programs. If preferred, the end user can set
each program to their own comfort
temperature, with only 1 SETBACK
temperature for overnight.
If you would like to add a further 2 daily
programs, follow these steps:
1. Tap the MODE button until your
thermostat is OFF (*).
2. Press and hold the ALL DAY & HOLIDAY
buttons together. Then, tap the ►►
button to enter the technical settings
menu. Release all buttons.
3. Tap ►► until you see C0dE. You won’t
need a code for this function, so tap
►► once more.
4. The screen will show Err and will then
be replaced with Pro9ran5 and the
number of programs that are currently
being used. Use the + button to select
either 4 or 6 programs.
5. Press the HOME button to exit the
technical settings menu.
Setting Programs
1. Choose a Program Schedule as shown
above.
2. Press the ►►button to move onto
Program 1 (P1). The time will be
flashing on the display.
3. Use the +/- buttons to set your start
time, then press the ►►button to
move on to the temperature for P1.
4. Use the +/- buttons to set your P1
temperature and press the ►►button
to move on to P2.
5. Use the +/- buttons to set your P2 start
time (this is when you want your
heating to go OFF), then press the
►►button to move on to the
temperature for P2.
6. Use the +/- buttons to set your P2
temperature, remember this is an OFF
program so you may want to set it
To Next Page
Loading...
