Set The Time & Date
1. Tap on the TIME/DATE button. The
hour digits will flash.
2. Use the +/- buttons to adjust the digits
to the correct hour.
3. Tap the ►►button, the minute digits
will flash. Use the +/- buttons to adjust
the digits to the correct minutes.
4. Tap the ►►button, the date digits will
flash. Use the +/- buttons to adjust the
digits to the correct date.
5. Tap the ►►button, the month digits
will flash. Use the +/- buttons to adjust
the digits to the correct month.
6. Tap the ►►button, the year digits will
flash. Use the +/- buttons to adjust the
digits to the correct year.
7. Tap the ►►button & use the +/-
buttons to select between 12 Hour
Clock or 24 Hour Clock.
Modes
Your ESRTP4RFW has 3 Modes, which can be
selected by tapping the MODE button:
AUTO – AUTO will appear on the screen and
your programs will run. When in AUTO, you can
still adjust the current SET temperature
temporarily by using the +/- buttons. The time
shown on the display will alternate between
showing the current time and a countdown.
The countdown is telling you how much time is
remaining until the next program is due to
start. When the countdown reaches 0h:00,
your override will be cancelled & the next
program will begin as normal. You can cancel
the override at any time by pressing the HOME
button.
MANUAL – MAN will show on the display. Use
the +/- buttons to adjust the SET temperature
to a comfortable level. Your thermostat will
To Next Page
Loading...
