ESI NEVA UNO - Neva Uno Technical Specifications

ESI Neva Uno
15
5. Specifications
- USB 3.1 audio interface with USB-C connector, USB 2.0 compatible ("type A" to "type C" cable
included, "type C" to "type C" cable not included)
- USB bus powered
- 2 input / 2 output channels at 24-bit / 192kHz
- XLR combo microphone preamp with +48V phantom power support
- Hi-Z instrument input with 1/4" connector
- line output with unbalanced RCA connectors
- headphone output with 1/4" connector
- ADC with 97dB(a) dynamic range
- DAC with 107dB(a) dynamic range
- frequency response: 20Hz to 20kHz, +/- 0.02 dB
- input gain range: 50dB
- input impedance: line 10 KΩ / mic 3.3 KΩ / Hi-Z 500 KΩ
- line max. output level: 15.7dBu
- headphone impedance: 32 Ω
- headphone max. output level: 6.5dBu
- real time hardware input monitoring activated by switch
- master output volume control
- stereo hardware loopback channel for internal recording
- EWDM driver supports Windows 10 / 11 with ASIO 2.0, MME, WDM and DirectSound
- supports OS X / macOS (10.9 and above) via the native CoreAudio USB audio driver from
Apple (no driver installation needed)
- 100% class compliant (no driver installation required on many modern operating systems such as
Linux via ALSA as well as iOS based and other mobile devices)