Celebrating over 30 years of excellence in manufacturing ultrasonic cleaning
equipment, electropolishing equipment and associated chemistries
ESMA, Inc.
P. O. BOX 734 * SOUTH HOLLAND, IL 60473 * (800)-276-2466 * FAX (708)331-8919
A "P' trap (not supplied) is then to be attached to tailpiece (D) prior to hookup to drain line.
4. ELECTRICAL
The unit is rated at 1500 W, 120 VAC, 50/60 HZ. Only the power module is plugged into your 120 VAC supply
(diagram 4).
The Tank Module has two plugs. Plug (K) goes to the under side of Control Module and attaches to receptacle (L).
Plug (1) is attached to power module at receptacle (E).
Control Module has two plugs, (M) and (N), which attach to receptacles (C) and (G) on the power module.
Only the plug from power module (A) is to be connected to your power source. Unit must be electrically grounded.
The power cord must be connected to a three-way grounded outlet. For 2- wire service, an adapter with external
ground wire is necessary. Connect the green grounding wire of the adapter to the screw, which holds the electric outlet
plate cover to the socket. DO NOT OPERATE UNIT WITHOUT PROPER GROUNDING. A fuse, 15 AMP 120 VAC, is
located on the power module.
To Next Page
Loading...