20
Selecting speakers
Press the SPEAKER SELECT button to cycle through the following
speaker selections.
A
c
B
c
A+B
Adjusting the balance
Adjust the balance between the left and right output channels.
Dimmer
Each time you press the DIMMER button, the brightness of the dis-
play and indicators change as follows.
DIMMER3
c
DIMMER2
c
DIMMER1
c
Off
(normal brightness)
o Even when set to off, the display will light at normal brightness for
a few seconds when you press a button or turn a knob. If TONE
BYPASS is on, however, this will not light when the tone controls
are turned.
o In setting mode, the display lights at normal brightness.
Basic operation (continued)
To Next Page
Loading...
Need help?
General
