Esoteric K-01X - Setting Mode Operations; Accessing and Exiting Setting Mode

24
Setting mode
1 3
4
2
Changing settings
1 When stopped or during playback, press and hold
the MODE button for two or more seconds.
Press for at least
2seconds
2 Press the MODE button repeatedly to select dier-
ent setting items.
Each time you press the MODE button, the item shown on the
display changes as follows.
APS>
3
DPaOFF>
3
DOUT>
3
AOUT>
UPCONV>
c
PCMF>
c
DSDF>
c
CLK>
o Depending on the selected source and operation status,
some items might not appear.
o If you do nothing for 10 or more seconds, setting mode will
end and ordinary display will resume.
o When the menu is open, if you press and hold the MODE
button for at least two seconds, or you press the stop (8)
button once, setting mode will end and the ordinary display
will reappear.
3 Use the main unit or remote control skip buttons
(.//) to change settings.
To change multiple items, repeat steps
2
and
3
.
4 Press and hold the MODE button for two or more
seconds to end setting mode.
Press for at least
2seconds
Setting mode will also end and the ordinary display will reap-
pear if nothing is done for 10 seconds or the stop (8) button is
pressed once.
o Settings are retained even if the unit is left unplugged.