ESP Aperta APDSMW - User Manual

U S E R M A N U A L
w w w . e s p u k . c o m
A P D S M W
|
M U L T I W A Y V I D E O D O O R S T A T I O N
APDSMW Manual.qxp_Layout 1 29/01/2016 13:01 Page 1

Summary

Installation

Door Station Placement and Orientation

Door Station Mounting Procedure

Door Station Wiring Example 1

System PSU and Separator Wiring

Diagram and explanation of connecting the System PSU and Separator.

Monitor Connection and Addressing

How to connect monitors and set their unique Address IDs.

Wiring Constraints and Guidelines

Door Station Wiring Example 2

System PSU, Branch Controllers, and Door Stations

Wiring configuration involving multiple branch controllers and door stations.

Multiple Door Station Addressing

Branch Controller Dipswitch Settings

Branch Controller Impedance Setting

Lock Connection Example 1

Electro-magnetic and Electronic Lock Wiring

Wiring diagrams for both electro-magnetic and electronic door locks.

Lock Release Timer and Terminals

Door Station Jumper Configuration

Lock Connection Example 2

Jumper Settings for LOCK1 Release Modes

Different release modes (Volt-free N.O/N.C, 12vDC300mA) configurable via LOCK1 jumpers.

Secondary Switch (LOCK2) Options

Door Station Programming Guide

Entering Administration Mode

Steps to access the system's administration mode, including default code.

Setting a Lock Release Code

Procedure to program a specific 4-digit code for unlocking the door.

Deleting a Lock Release Code

Changing the Administrator Code

Installers Troubleshooting Guide

Troubleshooting No Video or Audio Signals

Checks to perform when no video or audio is received by the monitor.

Troubleshooting Lock Release Issues

Steps to diagnose and resolve problems with the door lock release function.

Troubleshooting Programming Tones

ESP Aperta APDSMW Specifications

General

Brand	ESP
Model	Aperta APDSMW
Category	Intercom System
Language	English