Need help?Do you have a question about the ESP Enterview MX EVMX2 and is the answer not in the manual?
Plan your MX Door Entry system considering doors, audio/video, colour, keypad, mounting, reader, and trade entry.
List of required equipment, power supplies, handsets, locks, cables, and basic cabling needs for installation.
Instructions for fitting the external call station, including location, mounting height, and cable routing.
Connect call buttons, power the camera, and wire lock release terminals using specific cable colours and power supply connections.
Diagrams illustrating various system configurations for main panels, extension panels, and overall system schematic.
Information on the trade button module, including front/back views, timer configuration, and operation.
Instructions for assembling the external call station and fitting/wiring the handset to the metal back plate.
Guide to programming user codes, adding, deleting, and changing keypad PINs, and setting lock times.
Instructions for adding, deleting, and changing programming codes for user cards/tags via the proximity reader.
Solutions for common problems like no picture, non-working monitors, lock issues, and simultaneous ringing.
General| Housing Material | ABS Plastic |
|---|---|
| Frequency Response | 300Hz ~ 3.4kHz |
| Operating Temperature | -10°C ~ +55°C |
| Call Button | Yes |
| LED Indicator | Yes |
To Next Page
