ESP Enterview MX EVMX2 - Planning and Installation; Planning Your MX Door Entry System; Equipment and Cabling Requirements

3
Planning and installing the Enterview MX
Planning your MX Door Entry System
 External call station
 How many Entry Doors (Front or/and Rear)
 Audio only or with Video
 Monochrome/ colour
 Integral Key pad
 Mounting Flush or surface
 Integral Proximity Reader
 External Call buttons (one per dwelling)
 Trade entry control
 Combined timed Lock and outdoor call station power supply (EVBPS)
Note: The maximum
cab
le distance per external call button to each handset is 100
meters using CAT5e cable. The maximum distance per supplied power supply
to each handset is 10 meters using 2 pairs of CAT5e cable.
Equipment required
 External call station (one required per door)
 Maximum of 6 call buttons without an expander
 Expander (if required) maximum of 9 call button per expander
 External call station power supply
D
C 12 volts (EVBPS) (one required per door)
 Handset EV5H/EV5HF (minimum of one per external call button)
 Electric lock magnetic (ML250)/Yale type (enter D)
 CAT5e cable minimum 4 cores (see Note above regarding cable distances)
 Push to exit button (one required per door if magnetic lock used)
 Emergency break glass green
 (One required per door if magnetic lock used and the door is deemed an
emergenc
y exit)
H
andsets
 Audio/video or Audio only note:- minimum of one per external call button
 Monochrome/colour picture
 Standard or hands free unit
Door Gear
 Power supply with timed output (EVBPS)
 Magnetic lock/Yale type lock
 Push to exit button
 Emergency break glass green (only needed when magnetic lock fitted and to an
emergency exit door)
Enterview MX Manual_Layout 2 07/10/2013 14:59 Page 3