ESPEC SH - Understanding Chamber Model Codes

Basic guide Introduction Bench-top type temperature (and humidity) chamber
ESPEC CORP. | 17
Understanding the chamber model code
The meaning of the model code of the chamber is described below. See the rating plate (on
the left side) for the model of the chamber being used.
This manual describes multiple chamber models. Read the section appropriate for your
chamber model.
S － 2
S － 2 4 2 – 5 Temperature change rate: 5℃/min

Temperature-Humidity control range (SH only)
H: Humidity chambe
r
U: Low temperature
chamber
Set temperature
2：-20C 4：-40C 6：-60C
Capacity
2：22.5L
6：64L
Standard temperature and
humidity range
Relative humidit
y
Temperature
[
C]
H: Humidity chambe
r
U: Low temperature
chamber
Set temperature 4：-40C
Capacity 2： 22.5L