ESPEC SH User Manual

Bench-top type temperature (and humidity) chamber Basic guide Introduction
6 | ESPEC CORP.
Risks and countermeasures during cleaning and maintenance For details, see
⑳
CAUTION
Close the door before supplying water to the water tank or cleaning it.
Failing to do so can result in injury caused by the head or waist hitting the door.
Section 9 in the
Installation guide
㉑
WARNING
Use appropriate methods to periodically clean parts of the chamber such as the electrical compartment, water circuit
chamber, and humidifying tray.
Failing to do so can result in burns and electric shock.
Section 5.2
Section 9 in the
Installation guide
㉒
CAUTION
Wait for the internal chamber temperature to reach near room temperature before cleaning the humidifying tray. Use
gloves to clean.
Failing to do so can result in burns and injury.
Section 5.4
㉓
CAUTION
Be careful of the hot water when draining the humidifying tray.
The hot water can result in burns.
Section 5.4
Section 6 in the
Installation guide
㉔
WARNING
When taking action on the primary side of the chamber breaker, be sure to turn off the main power supply switch at
your facility. Before opening the electrical compartment or water circuit chamber, be sure to turn off the chamber
breaker.
Failing to do so can result in electric shock.
Sections 6.1 and
6.6
㉕
WARNING
Use appropriate methods to replace and inspect the fuse.
Failing to do so can result in burns and electric shock.
Section 6.7
Risks and countermeasures during chamber disposal For details, see
㉖
WARNING
Have two people work together to remove and dispose of the door.
Failing to do so can result in injury and in an individual becoming trapped in the test area.
Section 1.4

ESPEC SH Specifications

General

Brand	ESPEC
Model	SH
Category	Climate chamber
Language	English