ESS 2000 Series - Section 6 - Troubleshooting

ESS 2000 Series Skirting System 08/06/2021
17
SECTION 6 – TROUBLESHOOTING
PROBLEM
SOLUTION
1.
Conveyor belt won’t run after
installation.
Skirting Rubber is installed too tightly against conveyor
belt.
2.
Excessive Skirting Rubber
wear.
Skirting Rubber is installed too tightly against conveyor
belt.
3.
Product leaking from under
skirting.
Skirting rubber is not installed uniformly against the belt.