ESS 2000 Series - 3.5 Unusual Conditions

ESS 2000 Series Skirting System 08/06/2021
8
SNUG-FIT SKIRT RUBBER
BELT
THROUGH
ANGLE
DIM ‘A’
WHICH EDGE DOWN
15°
10 - 15
20°
20°
10 - 15
20°
30°
15
45°
35°
15 - 20
45°
45°
25
45°
For Square Edge Skirting Rubber ensure 8 – 12mm from conveyor belt to
the bottom of the existing steel work is obtainable.
IF ANY OF THE ABOVE PROBLEMS EXIST, CORRECT BEFORE INSTALLATION OR
CONTACT ESS.
IF PRESENT, REMOVE EXISTING SKIRTING SYSTEM AND MOUNTING HARDWARE.
3.5 UNUSUAL CONDITIONS -
CONTACT ESS ON 1800 074 446 before installation if any of the following
conditions exist:
concave or convex curves in chute wall or belt.
extreme side pressures
fast (>4.6 m/sec) conveyor belt
temperature extremes - below 7° C or above 65° C
corrosive atmosphere