SECTION 1 - SAFETY
The ESS 2000 Conveyor Belt Skirting System is designed to be quickly and easily installed
and serviced by appropriate personnel.
Under no circumstances should servicing or installation of the ESS 2000 Skirt System be
carried out whilst the belt is in operation.
The conveyor must be shut down and locked out before any person enters or reaches into
the conveyor enclosure.
Ensure that only suitably qualified and trained personel install and service this product.
Ensure that all site and statutory safety procedures are followed.
All equipment, equipment access and installation / service procedures must comply with
AS1755, Conveyors – Safety Requirements.
ESS strongly recommends that a thorough Job Safety Analysis should be undertaken prior
to commencement of the installation to identify and manage hazards.
To Next Page
Loading...