INSTALLATION Page 5
INSTALLATION
Helpy Compact can be fixed with 2 screws or with the pre-drilled double-sided
adhesive rubber supplied.
Fixing with double-sided adhesive rubber
Remove the film from one side of the adhesive rubber.
Attach the adhesive rubber to the COP, paying attention that the hole
reserved for the microphone of the Helpy Compact (E in the picture at
page 2) corresponds to a free hole of the COP.
Remove the film from the second side of the adhesive rubber.
Attach the Helpy Compact to the adhesive rubber, paying attention to
the correspondence of the holes.
To Next Page
Loading...
